Photon science image sensors
Teledyne e2v offers a range of back illuminated, deep depleted, low noise CCD image sensors for use in X-ray detection at X-ray Free-Electron Laser (XFEL) facilities. These facilities produce some of the most intense electromagnetic radiations in the world which are used to investigate the microscopic world of atoms and electrons.
For soft X-rays (<3000eV) Teledyne e2vâ€™s back thinning technology, with no anti-reflection coating significantly increases the Xâ€ray quantum efficiency over indirect detection methods. For this energy rangeÂ the CCD262 has proven to be the preferred choice.Â For higher energies (X-rays between 3,000eV to 20,000eV) where indirect detection with a scintillator has normally been necessary, back illuminated HiRho CCDs canÂ deliver high quantum efficiency for direct detectionÂ of the optical photons.
Teledyne e2v’s XFEL CCD image sensors:
|Pixel size||50 Âµm||50 Âµm||50 Âµm|
|Device Type||Front illuminated||Back thinned||Back thinned|
|Depletion depth||50 Âµm||300 Âµm||300 Âµm|
|System Noise* (ph@6keV)||0.06 â€“0.15||0.12 â€0.15||0.02 â€“ 0.037|
|Peak signal* (ph@6keV)||2500 â€ 3000||2100||970|
|Nominal QE (%@6keV)||77||100||100|
|Nominal QE (%@12keV)||19||73||73|
|Comments||1st generation||Better QE
Lower peak signal
Application XQO, XAFS
* Noise and peak signal are given in equivalent signal from a photon with an energy of 6keV.
Further increases in pulse rates require sensors with much higher readout rates not possible with CCDs. Teledyne e2v is currently looking into the development of CMOS image sensors which can offer good radiation hardness, while maintaining a high dynamic range and very high frame rate.
Download the Photon science image sensors flyer.
For more information on the Photon science market please click here